Therapedic™ Positioning Restraint System Model #2000 and Model #2500 Instructions for Use MODEL #2000: Use only with individuals who weigh betwee
10 Installation The Therapedic Positioning Restraint System must be installed with a Tether Strap which is included. The tether strap must be attac
11 5. Pull the seat belt out completely to engage the retractor, then route the belt between the back of the restraint and the metal tubes which are
12 1. Place the Positioning Restraint System in a forward facing position on the vehicle seat. If the front edge of the restraint extends more tha
13 Figure 3: Combination Lap/Shoulder Belt with Locking Clip Restraint System is secure. When properly installed, the restraint will not move more
14 6. Make sure that the seat belt in not twisted, then buckle in place. 7. Make sure the restraint system is flat against the vehicle seat’s botto
15 Installing the Tether Strap LATCH Vehicle Installation The TheraPedic Positioning Restraint System includes a top anchorage strap, known as a
16 An incorrectly mounted restraint system may come loose during an accident which could result in serious injury or death to the user. Damage
17 Figure 7: Single hook attachment for individuals under 80 lbs. (36kg) 3. Attach one tension adjuster hook to the upper side anchor bracket locat
18 For individuals greater than 80 lbs. (36 kg): use two (2) tether hooks attaching one (1) tether hook to the tether anchor immediately behind t
19 The Therapedic Positioning Restraint System includes the following standard components: 5-Point Safety Harness Shoulder Harness Pads
2 Important Safety Information ... Page 3 Vehicle Seat Belt Compatibility ...
20 Checking the Harness Height 1. Place the user in the Positioning Restraint System and properly secure with the harness. 2. Note the position of
21 4. The shoulder straps can be independently adjusted by pressing the grey button on the tension adjuster then adding or removing slack in the we
22 4. To adjust pads, lift the upholstery cover from the sides of the restraint shell. The pads are located between the inside of the plastic shell
23 Viscoelastic Foam Padding Set of seat and back foam supports with an added layer of memory foam to cradle the body prominences for pressure reduct
24 Once the Therapedic™ Positioning Restraint System has been properly fitted and installed in the vehicle, follow these instructions to secure the
25 Cleaning Instructions Removing the Cover Remove the head pads and positioning pads (if present) by releasing the lanyards from the back of t
26 Cleaning the Harness and Buckle The harness straps may be cleaned by sponging them with warm water and a mild detergent. The buckle may be c
27 Copy of Registration Card Please promptly fill out and return the attached card. Although child restraint systems undergo testing and evaluation
28 11724 Willake Street Santa Fe Springs, CA 90670 (562) 282-0244 (800) 454-6612 Fax: (310) 305-1718 Email: [email protected] Website: www.col
3 WARNING! DEATH OR SERIOUS INJURY can occur: MODEL #2000: Use only with individuals who weigh between 20 and 102 pounds (9.1— 46.3 kg) and who
4 This Positioning Restraint System is designed to fit a wide range of individuals. To ensure a proper fit for the user, it is important that th
5 The harness assembly is for use only with the Therapedic Positioning Restraint System. Do not use the harness independently of the seat. I
6 IMPORTANT: Vehicle seats and safety seat belts differ from vehicle to vehicle. Always refer to your vehicle owner’s manual or call the vehicl
7 Lap belts with an emergency locking retractor (ELR), which means that the lap belt will only lock in the event of a sudden stop or crash. M
8 1. Adjustable Head Pads 2. Shoulder Harness Pads 3. Lateral Positioning Pads (under cover) 4. Crotch Strap Pad 5. Chest
9 7 8 1 2 3 4 7 11 10 12
Commenti su questo manuale